Воведување на ROBO 3D R1 Плус Целосно составени 3D за печатење. Оваа моќна единица може да се создаде било кој објект можете да си замислите до 8 инчи висок и 9 inches wide with professional quality precision printing with a maximum resolution of 100 microns. With ROBO 3D R1 Plus, you can choose your materials. It works with PLA, ABS, t-glase, lay wood, и повеќе. This 3D printer features a heated print bed to ensure your creation cools efficiently and evenly. The print bed also automatically calibrates to guarantee the print is accurate. The ROBO 3D R1 Plus is great for making prototypes as well as small parts and pieces. Because it comes fully assembled, the ROBO 3D R1 Plus is easy and ready to use so there is no fumbling with parts.
Многу убав дизајн
http://Многу убав дизајн?Многу убав дизајн&Многу убав дизајн
http://Многу убав дизајн
- Fabricates parts up to 10 x 9 x 8 inches (D x W x H) in size or 720 cubic inches in volume
- Prints layers up to a maximum resolution of 100 microns
- Fabricates parts using 1.75-mm ABS, PLA, t-glase, lay wood, HIPS, and flexible filament (sold separately)
- Heated print bed prevents uneven cooling and warping of printed parts
- Automatic calibration and bed leveling ensures precise prints
Примери на Printings
Изберете го вашиот производ
ROBO 3D R1 Плус 10x9x8-инчен ABS / PLA 3D за печатење, Белата (A1-0002-000)
- Fabricates parts up to 10 x 9 x 8 inches (D x W x H) in size or 720 cubic inches in volume
- Prints layers up to a maximum resolution of 100 microns
- Fabricates parts using 1.75-mm ABS, PLA, t-glase, lay wood, HIPS, and flexible filament (sold separately)
Последно ажурирање беше на: април 22, 2024 2:01 сум
$722.81
- Fabricates parts up to 10 x 9 x 8 inches (D x W x H) in size or 720 cubic inches in volume
- Prints layers up to a maximum resolution of 100 microns
- Fabricates parts using 1.75-mm ABS, PLA, t-glase, lay wood, HIPS, and flexible filament (sold separately)
- Heated print bed prevents uneven cooling and warping of printed parts
- Automatic calibration and bed leveling ensures precise prints
ROBO 3D R1 Fully Assembled 3D Printer, 8" x 9" x 10"...
- Fabricates parts up to 8 x 9 x 10 inches (H x W x D) in size or 720 cubic inches in volume
- Prints layers up to a maximum resolution of 100 microns
- Fabricates parts using 1.75-mm ABS, PLA, t-glase, laywood, HIPS, and flexible filament (sold separately)
Последно ажурирање беше на: април 22, 2024 2:01 сум
- Fabricates parts up to 8 x 9 x 10 inches (H x W x D) in size or 720 cubic inches in volume
- Prints layers up to a maximum resolution of 100 microns
- Fabricates parts using 1.75-mm ABS, PLA, t-glase, laywood, HIPS, and flexible filament (sold separately)
- Heated print bed prevents uneven cooling and warping of printed parts
- Automatic calibration and bed leveling ensures precise prints
ROBO 3D Printer Print-Your-Own Quadcopter Drone Kit
- Select from 3 drone body styles to 3D print your own Quadcopter
- Print time is 4-5 hours per half (10 hours total), assembly time is 15-30 минути
- Quadcopter dimensions are 226 mm motor-to-motor (Measured diagonally). weight ranges from 10G to 128G. Fly radius is 50 meters from the remote
Последно ажурирање беше на: април 22, 2024 2:01 сум
$84.99
- Select from 3 drone body styles to 3D print your own Quadcopter
- Print time is 4-5 hours per half (10 hours total), assembly time is 15-30 минути
- Quadcopter dimensions are 226 mm motor-to-motor (Measured diagonally). weight ranges from 10G to 128G. Fly radius is 50 meters from the remote
- Includes 3D printable files, motors, electronics/wiring/parts, and assembly instructions - 3D printer sold separately
- Kit includes propellers (4), motors (4), extension wires (4), board (1), gears (4), propellers (4), screws (12), Bushings (8), controller (1), battery (1), and charger (1)
ROBO 3D R1 Printer with MatterControl Touch Controller
- R1 ROBO 3D Printer Fully Assembled with 10 x 9 x 8" heat bed, 100 Micron Quality, and the ability to print with over 15+ Materials
- MatterControl Touch gives you the ability create, edit and prepare models directly on your 3D printer using a simple touchscreen interface. It includes wireless internet capabilities
Последно ажурирање беше на: април 22, 2024 2:01 сум
- R1 ROBO 3D Printer Fully Assembled with 10 x 9 x 8" heat bed, 100 Micron Quality, and the ability to print with over 15+ Materials
- MatterControl Touch gives you the ability create, edit and prepare models directly on your 3D printer using a simple touchscreen interface. It includes wireless internet capabilities
- Plug in your MatterControl Touch to your R1 3D Printer, connect via USB to any compatible 3D printer and then follow the simple setup wizard
Robo 3D R1 PLUS Fully Assembled 3D Printer with MatterControl Touch Controller
- Fabricates parts up to 8 x 9 x 10 inches (H x W x D) in size or 720 cubic inches in volume
- MatterControl Touch turns the Robo into a truly independent internet-connected device
- Remote Printing - Send models to your printer from anywhere, or transfer models between printers
Последно ажурирање беше на: април 22, 2024 2:01 сум
$1,099.00
- Fabricates parts up to 8 x 9 x 10 inches (H x W x D) in size or 720 cubic inches in volume
- MatterControl Touch turns the Robo into a truly independent internet-connected device
- Remote Printing - Send models to your printer from anywhere, or transfer models between printers
- Onboard Camera - Take a picture of your finished print or check on the status while printing
- Model Editing Tools - Make simple changes to your 3D model quickly and easily prior to printing
ROBO 3D R1 Плус 10x9x8-инчен ABS / PLA 3D за печатење, Белата (A1-0002-000) and HATCHBOX...
- Fabricates parts up to 8 x 9 x 10 inches (H x W x D) in size or 720 cubic inches in volume
- Prints layers up to a maximum resolution of 100 microns
- Fabricates parts using 1.75-mm ABS, PLA, t-glase, lay wood, HIPS, and flexible filament (sold separately)
Последно ажурирање беше на: април 22, 2024 2:01 сум
$743.22
- Fabricates parts up to 8 x 9 x 10 inches (H x W x D) in size or 720 cubic inches in volume
- Prints layers up to a maximum resolution of 100 microns
- Fabricates parts using 1.75-mm ABS, PLA, t-glase, lay wood, HIPS, and flexible filament (sold separately)
- Heated print bed prevents uneven cooling and warping of printed parts
- 1 KG (approximately 2.20 lbs) spool
- 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
- ABS (Acrylonitrile Butadiene Styrene) 3D Printer Filament Vacuumed Sealed With Desiccant
- Recommended Extrusion/Nozzle Temperature 210°C - 240°C (410°F - 464°F), Use With Heated Build Platform Is Recommended
ROBO 3D R1 Плус 10x9x8-инчен ABS / PLA 3D за печатење, Белата (A1-0002-000) and HATCHBOX...
- Fabricates parts up to 8 x 9 x 10 inches (H x W x D) in size or 720 cubic inches in volume
- Prints layers up to a maximum resolution of 100 microns
- 1 KG (approximately 2.20 lbs) spool
- 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
Последно ажурирање беше на: април 22, 2024 2:01 сум
$744.82
- Fabricates parts up to 8 x 9 x 10 inches (H x W x D) in size or 720 cubic inches in volume
- Prints layers up to a maximum resolution of 100 microns
- 1 KG (approximately 2.20 lbs) spool
- 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
