Memperkenalkan ROBO 3D R1 Ditambah Sepenuhnya Rakitan Printer 3D. Unit yang kuat ini dapat membuat objek apapun yang dapat Anda bayangkan hingga 8 inci tinggi dan 9 inches wide with professional quality precision printing with a maximum resolution of 100 mikron. With ROBO 3D R1 Plus, you can choose your materials. It works with PLA, ABS, t-glase, lay wood, dan lebih. This 3D printer features a heated print bed to ensure your creation cools efficiently and evenly. The print bed also automatically calibrates to guarantee the print is accurate. The ROBO 3D R1 Plus is great for making prototypes as well as small parts and pieces. Because it comes fully assembled, the ROBO 3D R1 Plus is easy and ready to use so there is no fumbling with parts.
Oleh Weston
http://facebook.com/profile.php?id = 100000479321484&Vref = ts
http://twitter.com/MagicFemu
- Fabricates parts up to 10 x 9 x 8 inci (D x W x H) in size or 720 cubic inches in volume
- Cetakan lapisan hingga resolusi maksimum 100 mikron
- Fabricates parts using 1.75-mm ABS, PLA, t-glase, lay wood, HIPS, and flexible filament (dijual terpisah)
- Heated print bed prevents uneven cooling and warping of printed parts
- Automatic calibration and bed leveling ensures precise prints
Contoh percetakan
Pilih Produk Anda
ROBO 3D R1 Ditambah 10x9x8-Inch ABS / Printer PLA 3D, putih (A1-0002-000)
- Fabricates parts up to 10 x 9 x 8 inci (D x W x H) in size or 720 cubic inches in volume
- Cetakan lapisan hingga resolusi maksimum 100 mikron
- Fabricates parts using 1.75-mm ABS, PLA, t-glase, lay wood, HIPS, and flexible filament (dijual terpisah)
update terakhir pada: April 22, 2024 2:01 saya
$722.81
- Fabricates parts up to 10 x 9 x 8 inci (D x W x H) in size or 720 cubic inches in volume
- Cetakan lapisan hingga resolusi maksimum 100 mikron
- Fabricates parts using 1.75-mm ABS, PLA, t-glase, lay wood, HIPS, and flexible filament (dijual terpisah)
- Heated print bed prevents uneven cooling and warping of printed parts
- Automatic calibration and bed leveling ensures precise prints
ROBO 3D R1 Fully Assembled 3D Printer, 8" x 9" x 10"...
- Fabricates parts up to 8 x 9 x 10 inci (H x W x D) in size or 720 cubic inches in volume
- Cetakan lapisan hingga resolusi maksimum 100 mikron
- Fabricates parts using 1.75-mm ABS, PLA, t-glase, laywood, HIPS, and flexible filament (dijual terpisah)
update terakhir pada: April 22, 2024 2:01 saya
- Fabricates parts up to 8 x 9 x 10 inci (H x W x D) in size or 720 cubic inches in volume
- Cetakan lapisan hingga resolusi maksimum 100 mikron
- Fabricates parts using 1.75-mm ABS, PLA, t-glase, laywood, HIPS, and flexible filament (dijual terpisah)
- Heated print bed prevents uneven cooling and warping of printed parts
- Automatic calibration and bed leveling ensures precise prints
ROBO 3D Printer Print-Your-Own Quadcopter Drone Kit
- Select from 3 drone body styles to 3D print your own Quadcopter
- Print time is 4-5 hours per half (10 hours total), assembly time is 15-30 menit
- Quadcopter dimensions are 226 mm motor-to-motor (Measured diagonally). weight ranges from 10G to 128G. Fly radius is 50 meters from the remote
update terakhir pada: April 22, 2024 2:01 saya
$84.99
- Select from 3 drone body styles to 3D print your own Quadcopter
- Print time is 4-5 hours per half (10 hours total), assembly time is 15-30 menit
- Quadcopter dimensions are 226 mm motor-to-motor (Measured diagonally). weight ranges from 10G to 128G. Fly radius is 50 meters from the remote
- Includes 3D printable files, motors, electronics/wiring/parts, and assembly instructions - 3D printer sold separately
- Kit includes propellers (4), motors (4), extension wires (4), board (1), gears (4), propellers (4), screws (12), Bushings (8), controller (1), battery (1), and charger (1)
ROBO 3D R1 Printer with MatterControl Touch Controller
- R1 ROBO 3D Printer Fully Assembled with 10 x 9 x 8" heat bed, 100 Micron Quality, and the ability to print with over 15+ Materials
- MatterControl Touch gives you the ability create, edit and prepare models directly on your 3D printer using a simple touchscreen interface. It includes wireless internet capabilities
update terakhir pada: April 22, 2024 2:01 saya
- R1 ROBO 3D Printer Fully Assembled with 10 x 9 x 8" heat bed, 100 Micron Quality, and the ability to print with over 15+ Materials
- MatterControl Touch gives you the ability create, edit and prepare models directly on your 3D printer using a simple touchscreen interface. It includes wireless internet capabilities
- Plug in your MatterControl Touch to your R1 3D Printer, connect via USB to any compatible 3D printer and then follow the simple setup wizard
Robo 3D R1 PLUS Fully Assembled 3D Printer with MatterControl Touch Controller
- Fabricates parts up to 8 x 9 x 10 inci (H x W x D) in size or 720 cubic inches in volume
- MatterControl Touch turns the Robo into a truly independent internet-connected device
- Remote Printing - Send models to your printer from anywhere, or transfer models between printers
update terakhir pada: April 22, 2024 2:01 saya
$1,099.00
- Fabricates parts up to 8 x 9 x 10 inci (H x W x D) in size or 720 cubic inches in volume
- MatterControl Touch turns the Robo into a truly independent internet-connected device
- Remote Printing - Send models to your printer from anywhere, or transfer models between printers
- Onboard Camera - Take a picture of your finished print or check on the status while printing
- Model Editing Tools - Make simple changes to your 3D model quickly and easily prior to printing
ROBO 3D R1 Ditambah 10x9x8-Inch ABS / Printer PLA 3D, putih (A1-0002-000) and HATCHBOX...
- Fabricates parts up to 8 x 9 x 10 inci (H x W x D) in size or 720 cubic inches in volume
- Cetakan lapisan hingga resolusi maksimum 100 mikron
- Fabricates parts using 1.75-mm ABS, PLA, t-glase, lay wood, HIPS, and flexible filament (dijual terpisah)
update terakhir pada: April 22, 2024 2:01 saya
$743.22
- Fabricates parts up to 8 x 9 x 10 inci (H x W x D) in size or 720 cubic inches in volume
- Cetakan lapisan hingga resolusi maksimum 100 mikron
- Fabricates parts using 1.75-mm ABS, PLA, t-glase, lay wood, HIPS, and flexible filament (dijual terpisah)
- Heated print bed prevents uneven cooling and warping of printed parts
- 1 KG (sekitar 2.20 lbs) Kumparan
- 1.75mm Filament Diameter (Akurasi dimensi +/- 0.05mm)
- ABS (Acrylonitrile Butadiene Styrene) 3D Printer Filament Vacuumed Sealed With Desiccant
- Recommended Extrusion/Nozzle Temperature 210°C - 240°C (410°F - 464°F), Use With Heated Build Platform Is Recommended
ROBO 3D R1 Ditambah 10x9x8-Inch ABS / Printer PLA 3D, putih (A1-0002-000) and HATCHBOX...
- Fabricates parts up to 8 x 9 x 10 inci (H x W x D) in size or 720 cubic inches in volume
- Cetakan lapisan hingga resolusi maksimum 100 mikron
- 1 KG (sekitar 2.20 lbs) Kumparan
- 1.75mm Filament Diameter (Akurasi dimensi +/- 0.05mm)
update terakhir pada: April 22, 2024 2:01 saya
$744.82
- Fabricates parts up to 8 x 9 x 10 inci (H x W x D) in size or 720 cubic inches in volume
- Cetakan lapisan hingga resolusi maksimum 100 mikron
- 1 KG (sekitar 2.20 lbs) Kumparan
- 1.75mm Filament Diameter (Akurasi dimensi +/- 0.05mm)
