Gabatar da ROBO 3D R1 Plus Chikakken taru 3D bugawa. Wannan iko da naúrar iya ƙirƙirar wani abu da ka iya tunanin zuwa 8 inci high da kuma 9 inches wide with professional quality precision printing with a maximum resolution of 100 microns. With ROBO 3D R1 Plus, you can choose your materials. It works with PLA, ABS, t-glase, lay wood, kuma mafi. This 3D printer features a heated print bed to ensure your creation cools efficiently and evenly. The print bed also automatically calibrates to guarantee the print is accurate. The ROBO 3D R1 Plus is great for making prototypes as well as small parts and pieces. Because it comes fully assembled, the ROBO 3D R1 Plus is easy and ready to use so there is no fumbling with parts.
By Weston
http://facebook.com/profile.php?id=100000479321484&fref=ts
http://twitter.com/MagicFemu
- Fabricates parts up to 10 x 9 x 8 inci (D x W x H) in size or 720 cubic inches in volume
- Kwafi yadudduka har zuwa a kalla ƙuduri na 100 microns
- Fabricates parts using 1.75-mm ABS, PLA, t-glase, lay wood, kwatangwalo, and flexible filament (sayar dabam)
- Heated print bed prevents uneven cooling and warping of printed parts
- Automatic calibration and bed leveling ensures precise prints
Misalan Printings
Zabi samfur naka
ROBO 3D R1 Plus 10x9x8-Inch ABS / PLA 3D bugawa, White (A1-0002-000)
- Fabricates parts up to 10 x 9 x 8 inci (D x W x H) in size or 720 cubic inches in volume
- Kwafi yadudduka har zuwa a kalla ƙuduri na 100 microns
- Fabricates parts using 1.75-mm ABS, PLA, t-glase, lay wood, kwatangwalo, and flexible filament (sayar dabam)
Last update ya kan: Afrilu 22, 2024 2:01 ni
$722.81
- Fabricates parts up to 10 x 9 x 8 inci (D x W x H) in size or 720 cubic inches in volume
- Kwafi yadudduka har zuwa a kalla ƙuduri na 100 microns
- Fabricates parts using 1.75-mm ABS, PLA, t-glase, lay wood, kwatangwalo, and flexible filament (sayar dabam)
- Heated print bed prevents uneven cooling and warping of printed parts
- Automatic calibration and bed leveling ensures precise prints
ROBO 3D R1 Fully Assembled 3D Printer, 8" x 9" x 10"...
- Fabricates parts up to 8 x 9 x 10 inci (H x W x D) in size or 720 cubic inches in volume
- Kwafi yadudduka har zuwa a kalla ƙuduri na 100 microns
- Fabricates parts using 1.75-mm ABS, PLA, t-glase, laywood, kwatangwalo, and flexible filament (sayar dabam)
Last update ya kan: Afrilu 22, 2024 2:01 ni
- Fabricates parts up to 8 x 9 x 10 inci (H x W x D) in size or 720 cubic inches in volume
- Kwafi yadudduka har zuwa a kalla ƙuduri na 100 microns
- Fabricates parts using 1.75-mm ABS, PLA, t-glase, laywood, kwatangwalo, and flexible filament (sayar dabam)
- Heated print bed prevents uneven cooling and warping of printed parts
- Automatic calibration and bed leveling ensures precise prints
ROBO 3D Printer Print-Your-Own Quadcopter Drone Kit
- Select from 3 drone body styles to 3D print your own Quadcopter
- Print time is 4-5 hours per half (10 hours total), assembly time is 15-30 minti
- Quadcopter dimensions are 226 mm motor-to-motor (Measured diagonally). weight ranges from 10G to 128G. Fly radius is 50 meters from the remote
Last update ya kan: Afrilu 22, 2024 2:01 ni
$84.99
- Select from 3 drone body styles to 3D print your own Quadcopter
- Print time is 4-5 hours per half (10 hours total), assembly time is 15-30 minti
- Quadcopter dimensions are 226 mm motor-to-motor (Measured diagonally). weight ranges from 10G to 128G. Fly radius is 50 meters from the remote
- Includes 3D printable files, motors, electronics/wiring/parts, and assembly instructions - 3D printer sold separately
- Kit includes propellers (4), motors (4), extension wires (4), board (1), gears (4), propellers (4), screws (12), Bushings (8), controller (1), battery (1), and charger (1)
ROBO 3D R1 Printer with MatterControl Touch Controller
- R1 ROBO 3D Printer Fully Assembled with 10 x 9 x 8" heat bed, 100 Micron Quality, and the ability to print with over 15+ Materials
- MatterControl Touch gives you the ability create, edit and prepare models directly on your 3D printer using a simple touchscreen interface. It includes wireless internet capabilities
Last update ya kan: Afrilu 22, 2024 2:01 ni
- R1 ROBO 3D Printer Fully Assembled with 10 x 9 x 8" heat bed, 100 Micron Quality, and the ability to print with over 15+ Materials
- MatterControl Touch gives you the ability create, edit and prepare models directly on your 3D printer using a simple touchscreen interface. It includes wireless internet capabilities
- Plug in your MatterControl Touch to your R1 3D Printer, connect via USB to any compatible 3D printer and then follow the simple setup wizard
Robo 3D R1 PLUS Fully Assembled 3D Printer with MatterControl Touch Controller
- Fabricates parts up to 8 x 9 x 10 inci (H x W x D) in size or 720 cubic inches in volume
- MatterControl Touch turns the Robo into a truly independent internet-connected device
- Remote Printing - Send models to your printer from anywhere, or transfer models between printers
Last update ya kan: Afrilu 22, 2024 2:01 ni
$1,099.00
- Fabricates parts up to 8 x 9 x 10 inci (H x W x D) in size or 720 cubic inches in volume
- MatterControl Touch turns the Robo into a truly independent internet-connected device
- Remote Printing - Send models to your printer from anywhere, or transfer models between printers
- Onboard Camera - Take a picture of your finished print or check on the status while printing
- Model Editing Tools - Make simple changes to your 3D model quickly and easily prior to printing
ROBO 3D R1 Plus 10x9x8-Inch ABS / PLA 3D bugawa, White (A1-0002-000) and HATCHBOX...
- Fabricates parts up to 8 x 9 x 10 inci (H x W x D) in size or 720 cubic inches in volume
- Kwafi yadudduka har zuwa a kalla ƙuduri na 100 microns
- Fabricates parts using 1.75-mm ABS, PLA, t-glase, lay wood, kwatangwalo, and flexible filament (sayar dabam)
Last update ya kan: Afrilu 22, 2024 2:01 ni
$743.22
- Fabricates parts up to 8 x 9 x 10 inci (H x W x D) in size or 720 cubic inches in volume
- Kwafi yadudduka har zuwa a kalla ƙuduri na 100 microns
- Fabricates parts using 1.75-mm ABS, PLA, t-glase, lay wood, kwatangwalo, and flexible filament (sayar dabam)
- Heated print bed prevents uneven cooling and warping of printed parts
- 1 KG (kamar 2.20 lbs) Spool
- 1.75mm filament diamita (girma Kauce wa kuskure +/- 0.05mm)
- ABS (Acrylonitrile Butadiene Styrene) 3D Printer Filament Vacuumed Sealed With Desiccant
- Recommended Extrusion/Nozzle Temperature 210°C - 240°C (410°F - 464°F), Use With Heated Build Platform Is Recommended
ROBO 3D R1 Plus 10x9x8-Inch ABS / PLA 3D bugawa, White (A1-0002-000) and HATCHBOX...
- Fabricates parts up to 8 x 9 x 10 inci (H x W x D) in size or 720 cubic inches in volume
- Kwafi yadudduka har zuwa a kalla ƙuduri na 100 microns
- 1 KG (kamar 2.20 lbs) Spool
- 1.75mm filament diamita (girma Kauce wa kuskure +/- 0.05mm)
Last update ya kan: Afrilu 22, 2024 2:01 ni
$744.82
- Fabricates parts up to 8 x 9 x 10 inci (H x W x D) in size or 720 cubic inches in volume
- Kwafi yadudduka har zuwa a kalla ƙuduri na 100 microns
- 1 KG (kamar 2.20 lbs) Spool
- 1.75mm filament diamita (girma Kauce wa kuskure +/- 0.05mm)
