Представяне на ROBO 3D R1 Плюс Напълно сглобена 3D принтер. Тази мощна единица може да създаде всеки обект, можете да си представите до 8 инча висок и 9 inches wide with professional quality precision printing with a maximum resolution of 100 микрона. With ROBO 3D R1 Plus, you can choose your materials. It works with PLA, коремни мускули, t-glase, lay wood, и още. This 3D printer features a heated print bed to ensure your creation cools efficiently and evenly. The print bed also automatically calibrates to guarantee the print is accurate. The ROBO 3D R1 Plus is great for making prototypes as well as small parts and pieces. Because it comes fully assembled, the ROBO 3D R1 Plus is easy and ready to use so there is no fumbling with parts.
От Уестън
HTTP://facebook.com/profile.php?ID = 100000479321484&Fref = TS
HTTP://twitter.com/MagicFemu
- Fabricates parts up to 10 х 9 х 8 инча (D x W x H) in size or 720 cubic inches in volume
- Отпечатва слоеве с максимална разделителна способност 100 микрона
- Fabricates parts using 1.75-mm ABS, PLA, t-glase, lay wood, HIPS, and flexible filament (продава се отделно)
- Heated print bed prevents uneven cooling and warping of printed parts
- Automatic calibration and bed leveling ensures precise prints
Примери за Printings
Изберете вашия продукт
ROBO 3D R1 Plus 10x9x8-инчов ABS / PLA 3D принтер, бял (A1-0002-000)
- Fabricates parts up to 10 х 9 х 8 инча (D x W x H) in size or 720 cubic inches in volume
- Отпечатва слоеве с максимална разделителна способност 100 микрона
- Fabricates parts using 1.75-mm ABS, PLA, t-glase, lay wood, HIPS, and flexible filament (продава се отделно)
Последна актуализация беше на: април 22, 2024 2:01 съм
$722.81
- Fabricates parts up to 10 х 9 х 8 инча (D x W x H) in size or 720 cubic inches in volume
- Отпечатва слоеве с максимална разделителна способност 100 микрона
- Fabricates parts using 1.75-mm ABS, PLA, t-glase, lay wood, HIPS, and flexible filament (продава се отделно)
- Heated print bed prevents uneven cooling and warping of printed parts
- Automatic calibration and bed leveling ensures precise prints
ROBO 3D R1 Fully Assembled 3D Printer, 8" x 9" x 10"...
- Fabricates parts up to 8 х 9 х 10 инча (H x W x D) in size or 720 cubic inches in volume
- Отпечатва слоеве с максимална разделителна способност 100 микрона
- Fabricates parts using 1.75-mm ABS, PLA, t-glase, laywood, HIPS, and flexible filament (продава се отделно)
Последна актуализация беше на: април 22, 2024 2:01 съм
- Fabricates parts up to 8 х 9 х 10 инча (H x W x D) in size or 720 cubic inches in volume
- Отпечатва слоеве с максимална разделителна способност 100 микрона
- Fabricates parts using 1.75-mm ABS, PLA, t-glase, laywood, HIPS, and flexible filament (продава се отделно)
- Heated print bed prevents uneven cooling and warping of printed parts
- Automatic calibration and bed leveling ensures precise prints
ROBO 3D Printer Print-Your-Own Quadcopter Drone Kit
- Select from 3 drone body styles to 3D print your own Quadcopter
- Print time is 4-5 hours per half (10 hours total), assembly time is 15-30 минути
- Quadcopter dimensions are 226 mm motor-to-motor (Measured diagonally). weight ranges from 10G to 128G. Fly radius is 50 meters from the remote
Последна актуализация беше на: април 22, 2024 2:01 съм
$84.99
- Select from 3 drone body styles to 3D print your own Quadcopter
- Print time is 4-5 hours per half (10 hours total), assembly time is 15-30 минути
- Quadcopter dimensions are 226 mm motor-to-motor (Measured diagonally). weight ranges from 10G to 128G. Fly radius is 50 meters from the remote
- Includes 3D printable files, motors, electronics/wiring/parts, and assembly instructions - 3D printer sold separately
- Kit includes propellers (4), motors (4), extension wires (4), board (1), gears (4), propellers (4), screws (12), Bushings (8), controller (1), battery (1), and charger (1)
ROBO 3D R1 Printer with MatterControl Touch Controller
- R1 ROBO 3D Printer Fully Assembled with 10 х 9 x 8" heat bed, 100 Micron Quality, and the ability to print with over 15+ Materials
- MatterControl Touch gives you the ability create, edit and prepare models directly on your 3D printer using a simple touchscreen interface. It includes wireless internet capabilities
Последна актуализация беше на: април 22, 2024 2:01 съм
- R1 ROBO 3D Printer Fully Assembled with 10 х 9 x 8" heat bed, 100 Micron Quality, and the ability to print with over 15+ Materials
- MatterControl Touch gives you the ability create, edit and prepare models directly on your 3D printer using a simple touchscreen interface. It includes wireless internet capabilities
- Plug in your MatterControl Touch to your R1 3D Printer, connect via USB to any compatible 3D printer and then follow the simple setup wizard
Robo 3D R1 PLUS Fully Assembled 3D Printer with MatterControl Touch Controller
- Fabricates parts up to 8 х 9 х 10 инча (H x W x D) in size or 720 cubic inches in volume
- MatterControl Touch turns the Robo into a truly independent internet-connected device
- Remote Printing - Send models to your printer from anywhere, or transfer models between printers
Последна актуализация беше на: април 22, 2024 2:01 съм
$1,099.00
- Fabricates parts up to 8 х 9 х 10 инча (H x W x D) in size or 720 cubic inches in volume
- MatterControl Touch turns the Robo into a truly independent internet-connected device
- Remote Printing - Send models to your printer from anywhere, or transfer models between printers
- Onboard Camera - Take a picture of your finished print or check on the status while printing
- Model Editing Tools - Make simple changes to your 3D model quickly and easily prior to printing
ROBO 3D R1 Plus 10x9x8-инчов ABS / PLA 3D принтер, бял (A1-0002-000) and HATCHBOX...
- Fabricates parts up to 8 х 9 х 10 инча (H x W x D) in size or 720 cubic inches in volume
- Отпечатва слоеве с максимална разделителна способност 100 микрона
- Fabricates parts using 1.75-mm ABS, PLA, t-glase, lay wood, HIPS, and flexible filament (продава се отделно)
Последна актуализация беше на: април 22, 2024 2:01 съм
$743.22
- Fabricates parts up to 8 х 9 х 10 инча (H x W x D) in size or 720 cubic inches in volume
- Отпечатва слоеве с максимална разделителна способност 100 микрона
- Fabricates parts using 1.75-mm ABS, PLA, t-glase, lay wood, HIPS, and flexible filament (продава се отделно)
- Heated print bed prevents uneven cooling and warping of printed parts
- 1 КИЛОГРАМА (приблизително 2.20 lbs) макара
- 1.75mm Диаметър на нишката (Точност на размерите +/- 0.05mm)
- коремни мускули (Acrylonitrile Butadiene Styrene) 3D Printer Filament Vacuumed Sealed With Desiccant
- Recommended Extrusion/Nozzle Temperature 210°C - 240°C (410°F - 464°F), Use With Heated Build Platform Is Recommended
ROBO 3D R1 Plus 10x9x8-инчов ABS / PLA 3D принтер, бял (A1-0002-000) and HATCHBOX...
- Fabricates parts up to 8 х 9 х 10 инча (H x W x D) in size or 720 cubic inches in volume
- Отпечатва слоеве с максимална разделителна способност 100 микрона
- 1 КИЛОГРАМА (приблизително 2.20 lbs) макара
- 1.75mm Диаметър на нишката (Точност на размерите +/- 0.05mm)
Последна актуализация беше на: април 22, 2024 2:01 съм
$744.82
- Fabricates parts up to 8 х 9 х 10 инча (H x W x D) in size or 720 cubic inches in volume
- Отпечатва слоеве с максимална разделителна способност 100 микрона
- 1 КИЛОГРАМА (приблизително 2.20 lbs) макара
- 1.75mm Диаметър на нишката (Точност на размерите +/- 0.05mm)
